energy suspension engine mount insert civic 92-99

Energy Suspension Motor Mount Inserts can reduce wheel hop and put more of your power to the ground!

• Energy Suspension Motor Mount Inserts for many front wheel drive vehicles.
• Perfect for sport compact competition and performance motors.
• Motor Mount Inserts help reduce wheel hop resulting in traction loss.
• Prevents damage from excess torque.
• Energy Suspension Motor Mount Inserts improve and even fix torn motor mounts.
• Motor Mount Inserts are of HYPER-FLEX™ performance polyurethane.
• Resistant to oils, coolants, road contaminants, etc.

Energy Suspension motor mount inserts restore worn mounts and reduce motor movement. Under high performance conditions, Energy Suspension motor mount inserts reduce wheel hop and torque movement that can damage your vehicle! Energy Suspension Polyurethane motor mount inserts are tested to add motor support and stability to the existing motor mounts.

Typically, Energy Suspension motor mount inserts are mounted in the “torque mount” location of the vehicle. The two piece motor mount insert set is designed to be used in conjunction with the original motor mount. This design adds strength and toughness to the stock motor mounts. The motor mount inserts solution is easy to install or remove, returning the mount to stock configuration.

Energy suspension Motor Mount Inserts are made of HYPER-FLEX™ polyurethane material to ensure long-lasting performance, unlike bare stock rubber motor mounts. Available in red or black color.

How Do Energy Suspension Motor Mount Inserts work with Torn Motor Mounts?

Many typical motor mounts are made with voids in the rubber area of the motor mount. The voids in the rubber motor mount allow the engine and transmission some range of movement. Over time, the rubber inserts wear down and begin to tear, allowing the engine too much movement and setting the engine out of alignment with the motor mounts. Energy Suspension motor mount inserts fill those voids in the OEM motor mounts. Energy Suspension Motor Mount Inserts help to realign the motor by suspending the mounting point in the correct center of the OEM motor mount. By only filling the voids that are SUPPOSED to be empty, Energy Suspension’s motor mount inserts ensure that your motor mounts will stay aligned as they cannot move out out place.

Do Energy Suspension Motor Mount Inserts cause more vibration?

If your OEM motor mounts are new, then Motor Mount Inserts will likely increase the amount of engine vibration felt in the vehicle. Because the voids in the OEM Motor Mount are filled by these motor mount inserts - there is less room for absorption of the natural motor vibration.

However, in the case of some older vehicles with motor mounts that are in bad shape, Energy Suspension Motor Mount Inserts can actually reduce the amount of vibration felt from the motor. When motor mounts get old enough, the mounting point for the mount can sag or tear to the point where it’s touching the surrounding edge of the motor mount. This means that there is little to no cushioning between the motor and the rest of the mount; this can cause a lot more vibration by itself. Installing Energy Suspension’s motor mount inserts can increase the amount of cushioning in motor mounts that have gotten that bad and ensure that the motor wont flop about freely due to worn mounts.

How Do Energy Suspension Motor Mount Inserts Reduce Wheel Hop?

Energy Suspension Motor Mount Inserts are best known for their ability to reduce wheel hop and allow high performance vehicles to put more power into propelling the car forward. Energy Suspension Motor Mount Inserts operate with the same principles as Solid Motor Mounts. Many ultra high performance vehicles use solid motor mounts because they allow for very little motor movement. Because the motor is held firmly in place, there is no bouncing of the motor assembly. This allows the entire driveline assembly to maintain a solid geometry, reducing the excess movement caused by the otherwise violent release of power.

Basically, Energy Suspension Motor Mount Inserts offer the same performance of a solid motor mount, but without the extreme levels of vibration caused by a solid motor mount.

Can Energy Suspension Motor Mount Inserts Increase the Handling of my vehicle?

Because OEM Motor Mounts are designed with extra play and movement in their flimsy rubber motor mount inserts, adding Energy Suspension Motor Mount Inserts can firm up a number of otherwise loose points in the car. It’s easier to compare this effect to installing a strut tower bar. The purpose of that bar is to increase rigidness in points of the vehicle that are otherwise more open to movement in high performance handling. The same is true for Energy Suspension Motor Mount Inserts. Motor Mount Inserts firm up points at the front of the vehicle that would otherwise be prone to movement in high performance driving. While Energy Suspension Motor Mount Inserts are in no way designed with this as their purpose, some users have report this experience.

Keep your engine steady.
These Energy Suspension performance polyurethane motor mounts and motor mount inserts feature the best of both worlds--they're smooth running for the street and strong enough for the track. Torque-resistant, yet comparable in strength to solid metal mounts, they'll give you the performance you're looking for.

Energy Suspension B-Series engine mount inserts. Manufactured from quality polyurethane this kit reduces engine movement improving traction and eradicating wheel hop. In the pack you will get 6 pieces that are inserted into the front torque mounts and rear engine mount. These will only fit into genuine Honda mounts.

They both restore worn mounts and reduce unwanted motor assembly movement. Under high performance conditions, they reduce wheel hop and torque induced movement that can actually damage vehicle components! These polyurethane inserts are thoroughly tested to add support and stability to the existing O.E.M. motor mount system.

Typically, they are mounted in the "torque position" location of the vehicle motor and transmission mount system. The two piece supporting insert set is designed to be used in conjunction with the original stock motor mount. The benefit of this design is additional strength and toughness, thanks to the polyurethane support. This solution is easy to install and just as easy to remove and return the mount to stock configuration, if so desired.

Energy's specially formulated HYPER-FLEX™ performance polyurethane material is used to assure long-lasting performance, unlike many O.E.M. rubber motor mounts.

http://www.team-integra.net/forum/19-projects-diy-article-talk/67456-diy-energy-suspension-motor-mount-install.html

FEATURES:

• Prevents Tearing Of Original Soft Mount Material
• A Must-Use For High Performance Conditions
• Eliminates Excess Engine Movement

Performance Polyurethane Motor Mount & Transmission Mount Inserts

• Available for many popular sporty and performance front wheel drive vehicles.
• A real must to use for sport compact competition and performance uses.
• Helps reduce wheel hop and traction loss.
• Prevents damage to other vehicle components.
• Improves and even restores broken motor mounts.
• Made of Energy's HYPER-FLEX™ performance polyurethane.

Energy suspension engine mount insert
model 33016....................................................RM148
  Note : This Set Covers : Front Lower Left, Right nd Rear mounts With B Series Engine .  
  Manual Transmission Vehicles Only
  Material : Polyurethane